Non-clogging submersible sewage pumpIt is based on the introduction of advanced foreign technology and combined with domesticwater pumpThe new generation of pump products successfully developed based on the usage characteristics has the characteristics of significant energy saving effect, anti-winding, no clogging, automatic installation and automatic control. It has a unique effect in discharging solid particles and long fiber waste.

This series of pumps adopts a unique impeller structure and new type of mechanical seal, which can effectively deliver solids and long fibers. Compared with the traditional impeller, the impeller of this pump adopts the form of single flow channel or double flow channel. It is similar to an elbow with the same cross-section size. It has very good flow performance and is equipped with a reasonable volute, making the pump highly efficient. The impeller and impeller have undergone dynamic and static balance tests to ensure that the pump does not vibrate during operation.

Flow range of conveyed liquid:2~6000m³/h

Lift range:3~70m

Supporting power range:0.37~355KW

Caliber range:Ф25~Ф800mm

The medium temperature is

The pH value is in the range of 5~9;

Pump without internal gravity circulation cooling system,

The motor part shall not be exposed to more than 1/2 of the liquid surface;

It cannot be used to pump highly corrosive liquids.

1. It adopts a unique single-blade or double-blade impeller structure, which greatly improves the dirt passing capacity. It can effectively pass 5 times the fiber material of the pump caliber and solid particles with a diameter of about 50% of the pump caliber. The mechanical seal adopts a new type of hard material. The corrosion-resistant tungsten titanium material allows the pump to operate safely and continuously for more than 8,000 hours.

2. The overall structure is compact, small in size, low in noise, significant in energy saving, and easy to maintain. There is no need to build a pump room and it can work when submerged in water, which greatly reduces the project cost. The sealing oil chamber of the pump is equipped with a high-precision anti-interference water leakage detection system. The sensor has a thermal element embedded in the stator winding.water pumpAutomatic motor protection.

3. A fully automatic control cabinet can be equipped according to user needs to automatically protect the pump from water leakage, leakage, overload and over-temperature, etc., which improves the safety and reliability of the product. The float switch can automatically adjust the pump according to the required liquid level changes. It controls the starting and stopping of the pump without the need for special supervision and is extremely convenient to use.

4. The WQ series can be equipped with a double guide rail automatic coupling installation system according to user needs, which brings greater convenience to installation and maintenance. People do not have to enter the sewage pit for this, and can be used within the full lift, ensuring that the motor will not pass overload.

5. There are two different installation methods, fixed automatic coupling installation system and mobile free installation system.

Suitable for chemical industry, petroleum, pharmaceutical, mining, paper industry, cement plant, steel plant, power plant, coal processing industry, and citiessewage treatmentIt can also be used to pump clean water and corrosive media to remove particles of sewage and dirt from conveyor belts in factory drainage systems, municipal engineering, construction sites and other industries.