龙8头号玩家

Leave Your Message
Technology Center
Related content

Mirayiridzo yekuisa midziyo yekupa mvura yechipiri

2024-08-02

Sekondari midziyo yekupa mvuraKuisa uye kugadzirisa zvinhu zvakakosha kuti uve nechokwadi chekushanda kwakakodzera uyemvuraKugadzikana kwakakosha.

Zvinotevera ndezveSekondari midziyo yekupa mvuraDetailed data uye maitiro ekuisa uye kugadzirisa:

1.Installation details

1.1 Sarudzo yenzvimbo

  • Zvinodiwa zvezvakatipoteredza:
    • tembiricha range: 0°C -40°C
    • Humidity range: ≤ 90% RH (hapana condensation)
    • Ventilation zvinodiwa: Kufefetera kwakanaka, dzivirira zuva rakananga nemvura
  • Basic zvinodiwa:
    • basic materials: Kongiri
    • Foundation ukobvu: ≥ 200 mm
    • mwero≤ 2 mm/m
  • zvinoda nzvimbo:
    • nzvimbo yekushanda: Siya inokwana 1 mita yekushanda uye kugadzirisa nzvimbo yakatenderedza midziyo

1.2 Pipe yekubatanidza

  • pombi inopinza mvura:
    • Pipe dhayamita: Haifanire kunge iri pasi peiyo dhayamita yemvura inopinza yemidziyo
    • Material: Simbi isina tsvina, PVC, PE, nezvimwe.
    • Sefa saizi yepore: ≤ 5 mm
    • Tarisa valve pressure rating:PN16
    • Gedhi valve pressure rating:PN16
  • Pombi yekubuda:
    • Pipe dhayamita: Haifanire kunge iri pasi peiyo dhayamita yemidziyo yekubuda
    • Material: Simbi isina tsvina, PVC, PE, nezvimwe.
    • Tarisa valve pressure rating:PN16
    • Gedhi valve pressure rating:PN16
    • Pressure gauge range: 0-1.6 MPa

1.3 Kubatana kwemagetsi

  • Simba rinodiwa:
    • Voltage: 380V ± 10% (matatu-chikamu AC)
    • frequency: 50Hz ± 1%
    • Power cord cross-sectional area: Yakasarudzwa zvinoenderana nesimba remidziyo, kazhinji 4-16 mm²
  • Ground protection:
    • Ground resistance:≤ 4Ω
  • control system:
    • Launcher type: Soft starter kana frequency converter
    • Sensor type: Pressure sensor, kuyerera sensor, fluid level sensor
    • control Panel: NeLCD kuratidza kuratidza mamiriro ehurongwa uye paramita

1.4 Kuedza kumhanya

  • kuongorora:
    • Pipe connection: Ita shuwa kuti mapaipi ese akabatana zvakasimba uye hapana kuvuza.
    • Kubatana kwemagetsi: Ita shuwa kuti kubatanidza magetsi kwakaringana uye kwakadzikwa zvakanaka
  • wedzera mvura:
    • Nhamba yemvura yakawedzerwa: Zadza midziyo nemapombi nemvura uye bvisa mweya
  • tanga:
    • Nguva yekutanga: Tanga michina nhanho nhanho uye tarisa mamiriro ekushanda
    • Operating parameters: Kuyerera, musoro, kudzvanywa, nezvimwe.
  • debug:
    • Traffic debugging: Gadzirisa chiyero chekuyerera zvichienderana nezvinodiwa chaizvo kuti uve nechokwadi chekuti zvinodiwa nemvura zvinosangana
    • Pressure debugging: Debugging pressure zvinoenderana nezvinodiwa chaizvo kuona system kugadzikana

2.Chengetedza ruzivo rwakadzama

2.1 Kuongororwa kwezuva nezuva

  • Running status:
    • noise≤ 70 dB
    • vibration≤ 0.1 mm
    • tembiricha: ≤ 80°C (motor surface)
  • Electrical system:
    • Wiring kusimba: Tarisa kana wiring yakasununguka
    • Ground resistance:≤ 4Ω
  • pombi system:
    • Leak kuongorora: Tarisa iyo pombi system yemvura inodonha
    • Kuvhara cheki: Tarisa kana paine kuvharika mupombi system

2.2 Kugadzirisa nguva dzose

  • lubricating:
    • Mafuta ekuzora mhando: Lithium-based girisi
    • Lubrication cycle: Yakawedzerwa mwedzi mitatu yega yega
  • yakachena:
    • kuchenesa kutenderera: Chenesa mwedzi mitatu yega yega
    • nzvimbo yakachena: Equipment shell, pombi yemukati madziro, sefa, impeller
  • Zvisimbiso:
    • Inspection cycle: Tarisa mwedzi mitanhatu yega yega
    • Replacement cycle: Tsiva mwedzi gumi nemiviri yega yega

2.3 Kuchengetedza kwepagore

  • Disassembly kuongorora:
    • Inspection cycle: Inoitiswa mwedzi gumi nemiviri yega yega
    • Tarisa zvirimo: Pfekero dzemidziyo, mapeller, mabhengi, uye zvisimbiso
  • Kutsiva zvikamu:
    • Replacement cycle: Tsiva zvidimbu zvakasakara zvichienderana nemhedzisiro yekuongorora.
    • Kutsiva zvikamu: Impeller, mabhengi, zvisimbiso
  • Motor kugadzirisa:
    • Insulation resistance:≥ 1MΩ
    • Kupokana nemhepo: Tarisa zvinoenderana nemota yakatarwa

2.4 Marekodhi manejimendi

  • Operation rekodhi:
    • Rekodha zvirimo: Equipment kushanda nguva, kuyerera, musoro, kumanikidzwa uye mamwe parameters
    • Nguva yekurekodha:Rekodhi yezuva nezuva
  • Chengetedza zvinyorwa:
    • Rekodha zvirimo: Zviri mukati uye mhedzisiro yekuongorora kwega kwega, kugadzirisa uye kugadzirisa
    • Nguva yekurekodha: Yakanyorwa mushure mekugadzirisa kwega kwega
Mhosva Chikonzero kuongorora Kurapa nzira

Mudziyo hautange
  • kupera simba: Simba harina kubatana kana kuti voltage haina kukwana.
  • Nyaya dzekubatanidza magetsi: Wiring yakasununguka kana kuputsika.
  • Kudzora hurongwa hwekutadza: Starter kana control panel kutadza.
  • Motokari kukundikana: Injini inopiswa kunze kana mhepo inotenderera ipfupi-inotenderera.
  • Tarisa magetsi: Ita shuwa kuti simba ravepo uye voltage yakajairika.
  • Tarisa wiring: Tarisa uone kana kubatanidza kwemagetsi kwakasimba uye kugadzirisa mawaya akasununguka kana akatyoka.
  • Check control system: Tarisa yekutanga uye control panel, gadzirisa kana kutsiva zvikamu zvisina kunaka.
  • Tarisa mota: Tarisa kutenderera kwemota uye kudzivirira kudzivirira, uye tsiva mota kana zvichidikanwa.

Chigadzirwa chacho hachibudisi mvura
  • Pombi inopinza mvura yakavharwa: Sefa kana mvura inopinza yakavharwa nemarara.
  • Pane mweya mumudziyo: Kune mhepo mumidziyo uye mapaipi, zvichikonzera cavitation.
  • Impeller yakakuvadzwa: Iyo impeller yakasakara kana kukuvadzwa uye haigone kushanda nemazvo.
  • Kunyura kwemvura kureba kwakanyanya: Kukwirira kwemvura kureba kunodarika iyo inotenderwa mhando yemidziyo.
  • Mapombi anopinza mvura akachena: Chenesa marara musefa uye mvura inopinza kuti uve nechokwadi chekuyerera kwemvura.
  • Usasanganisa mweya: Zadza midziyo nemapombi nemvura uye bvisa mweya.
  • Check impeller: Tarisa impeller yekupfeka uye woitsiva kana zvichidikanwa.
  • Rongedza kureba kwekunyura kwemvura: Ita shuwa kuti kunyura kwemvura kureba kuri mukati meiyo inobvumidzwa mhando yemidziyo.

Midziyo yacho ine ruzha
  • Kupfeka kupfeka: Bearings dzakapfekwa kana kukuvadzwa, zvichikonzera ruzha rwekushandisa.
  • Impeller isina kuenzana: Iyo impeller haina kuenzana kana kuiswa zvisina kunaka.
  • Equipment vibration: Kubatana pakati pemidziyo nenheyo hakuna kusimba, zvichiita kuti kudedera.
  • Pipe resonance: Kuiswa kwepombi kusina kunaka kunotungamirira kune resonance.
  • Check bearings: Tarisa kupfeka kwemabheri uye shandura mabhengi kana zvichidikanwa.
  • Check impeller: Tarisa chiyero che impeller uye wodzosera kana kutsiva iyo impeller.
  • Midziyo yakaoma: Tarisa kubatana pakati pemidziyo uye nheyo uye simbisa mabhaudhi ese.
  • Gadzirisa pombi: Tarisa mamiriro ekuiswa kwepombi uye gadzirisa pombi kuti ubvise resonance.

Midziyo inodonha
  • Zvisimbiso zvakapfekwa: Iyo mechanika chisimbiso kana kurongedza chisimbiso chakapfekwa, zvichikonzera kubuda kwemvura.
  • Lose pipe connections: Mapombi ekubatanidza akasununguka kana kuvharwa zvisina kunaka.
  • Midziyo inotsemuka: Mudziyo wakatsemuka kana kukuvadzwa.
  • Tsiva zvisimbiso: Tarisa kupfeka kwezvisimbiso uye wozvitsiva kana zvichidikanwa.
  • Simbisa kubatanidza pombi: Tarisa kubatanidzwa kwepombi, simbisa uye simbisa.
  • Kugadzirisa michina: Tarisa kutendeseka kwemidziyo uye kugadzirisa kana kutsiva yakakuvadzwa midziyo.

Kusakwana kwemichina traffic
  • Pombi inopinza mvura yakavharwa: Sefa kana mvura inopinza yakavharwa nemarara.
  • Impeller kupfeka: Iyo impeller yakasakara kana kukuvadzwa, zvichikonzera kusakwana kuyerera.
  • Pane mweya mumudziyo: Kune mhepo mumidziyo uye mapaipi, zvichikonzera cavitation.
  • Kunyura kwemvura kureba kwakanyanya: Kukwirira kwemvura kureba kunodarika iyo inotenderwa mhando yemidziyo.
  • Mapombi anopinza mvura akachena: Chenesa marara musefa uye mvura inopinza kuti uve nechokwadi chekuyerera kwemvura.
  • Check impeller: Tarisa impeller yekupfeka uye woitsiva kana zvichidikanwa.
  • Usasanganisa mweya: Zadza midziyo nemapombi nemvura uye bvisa mweya.
  • Rongedza kureba kwekunyura kwemvura: Ita shuwa kuti kunyura kwemvura kureba kuri mukati meiyo inobvumidzwa mhando yemidziyo.

Kusakwana kwemidziyo kumanikidza
  • Impeller kupfeka: Iyo impeller yakasakara kana kukuvadzwa, zvichikonzera kusakwana kumanikidza.
  • Pane mweya mumudziyo: Kune mhepo mumidziyo uye mapaipi, zvichikonzera cavitation.
  • Kunyura kwemvura kureba kwakanyanya: Kukwirira kwemvura kureba kunodarika iyo inotenderwa mhando yemidziyo.
  • pombi kubuda: Pane kuvuza mupombi, zvichikonzera kusakwana kudzvanywa.
  • Check impeller: Tarisa impeller yekupfeka uye woitsiva kana zvichidikanwa.
  • Usasanganisa mweya: Zadza midziyo nemapombi nemvura uye bvisa mweya.
  • Rongedza kureba kwekunyura kwemvura: Ita shuwa kuti kunyura kwemvura kureba kuri mukati meiyo inobvumidzwa mhando yemidziyo.
  • Tarisa mapaipi: Tarisa kutendeseka kwepombi uye kugadzirisa kana kutsiva mapombi ari kubuda.

Kudzora hurongwa hwekutadza
  • Sensor kukundikana: Pressure sensor, kuyerera sensor kana fluid level sensor kutadza.
  • Kutadza kwepaneru yekudzora: Iyo control panel inoratidza zvisirizvo kana kuti haigone kushandirwa.
  • Nyaya dzekubatanidza magetsi: Wiring yakasununguka kana kuputsika.
  • Tarisa sensor: Tarisa kubatana uye chimiro che sensor uye tsiva iyo sensor kana zvichidikanwa.
  • Tarisa control panel: Tarisa kubatana uye chimiro chepaneru yekudzora uye tsiva iyo control panel kana zvichidikanwa.
  • Tarisa kubatanidza magetsi: Tarisa uone kana kubatanidza kwemagetsi kwakasimba uye kugadzirisa mawaya akasununguka kana akatsemuka.

Kuburikidza nekukanganisa kwakadzama uye nzira dzekugadzirisa, unogona kugadzirisa zvinobudiriraSekondari midziyo yekupa mvuramatambudziko anowanikwa panguva yekushanda, ona kuti arimvuraInogona kushanda zvakajairika panguva yekuita, nekudaro ichiita zvinobudirira zvinodiwa zvemvura zvevashandisi.