Okulandelayo kumayelanaIphampu yokumunca kabiliIdatha enemininingwane nezincazelo zomhlahlandlela wokukhetha:

1.龙8头号玩家:Iphampu yokumunca kabiliUhlolojikelele oluyisisekelo lwe

Iphampu yokumunca kabililuhlobo lwe龙8头号玩家:iphampu ye-centrifugal, isici sayo sokuklama ukuthi uketshezi lungena ku-impeller kusuka ezinhlangothini zombili ngesikhathi esifanayo, ngaleyo ndlela kulinganisa amandla e-axial, futhi kufanelekile ukugeleza okukhulu nezimo zekhanda eliphansi.龙8头号玩家:Iphampu yokumunca kabiliIsetshenziswa kabanzi ekuhlinzekeni kwamanzi kamasipala, ukuhlinzekwa kwamanzi ezimbonini, amanzi ajikelezayo e-air conditioning, izinhlelo zokuvikela umlilo kanye neminye imikhakha.

2.Iphampu yokumunca kabiliIsakhiwo esiyisisekelo se

2.1 Umzimba wepompo

• Okubalulekile: I-cast iron, insimbi engagqwali, ithusi, njll.
• umklamo: Isakhiwo esihlukanisiwe esivundlile ukuze silungiswe kalula futhi silungiswe.

2.2 I-Impeller

• Okubalulekile: I-cast iron, insimbi engagqwali, ithusi, njll.
• umklamo:I-impeller yokudonsa kabili, uketshezi lungena ku-impeller lusuka ezinhlangothini zombili ngesikhathi esisodwa.

2.3 Iphampu shaft

• Okubalulekile: Amandla aphezulu ensimbi noma insimbi engagqwali.
• Umsebenzi: Xhuma injini ne-impeller ukuze udlulise amandla.

2.4 Ithuluzi lokuvala

• uhlobo: Mechanical seal noma ukupakisha uphawu.
• Umsebenzi: Vimbela ukuvuza koketshezi.

2.5 Amabhere

• uhlobo: I-Rolling bear noma i-sliding bear.
• Umsebenzi: Isekela i-pump shaft futhi inciphisa ukungqubuzana.

3.龙8头号玩家:Iphampu yokumunca kabiliisimiso sokusebenza

Iphampu yokumunca kabiliUmgomo wokusebenza ufana nepompo yokudonsa eyodwa, kodwa uketshezi lungena ku-impeller kusuka ezinhlangothini zombili ngesikhathi esifanayo, ukulinganisa amandla e-axial nokuthuthukisa ukuzinza nokusebenza kahle kwepompo. Uketshezi luzuza amandla e-kinetic ngaphansi kwesenzo se-impeller, lungena engxenyeni ye-volute yomzimba wepompo, luguqule amandla e-kinetic abe amandla okucindezela, futhi lukhishwe ngepayipi lokuphuma kwamanzi.futhaumzimba.

4.Amapharamitha wokusebenza

4.1 Ukugeleza (Q)

• incazelo: Inani loketshezi olulethwa yiphampu ngesikhathi seyunithi.
• iyunithi: Ama-Cubic metres ngehora (m³/h) noma amalitha ngomzuzwana (L/s).
• ububanzi: Ngokuvamile ngu-100-20000 m³/h, kuye ngemodeli yepompo kanye nokusetshenziswa.

4.2 Phakamisa (H)

• incazelo: Iphampu ingaphakamisa ukuphakama koketshezi.
• iyunithi: Imitha (m).
• ububanzi: Ngokuvamile amamitha angu-10-200, kuye ngemodeli yepompo kanye nokusetshenziswa.

4.3 Amandla (P)

• incazelo: Amandla enjini yephampu.
• iyunithiI-kilowatt (kW).
• Ifomula yokubala:( P = \frac{Q \izikhathi H}{102 \izikhathi \eta} )
  • (Q): izinga lokugeleza (m³/h)
  • (H): Phakamisa (m)
  • ( \eta ): ukusebenza kahle kwepompo (imvamisa ingu-0.6-0.8)

4.4 Ukusebenza kahle (η)

• incazelo: Ukusebenza kahle kokuguqulwa kwamandla kwephampu.
• iyunithi:amaphesenti(%).
• ububanzi: Ngokujwayelekile 70% -90%, kuye ngomklamo wepompo kanye nokusetshenziswa.

5.Umhlahlandlela wokukhetha

5.1 Nquma imingcele yesidingo

• Ukugeleza(Q): Inqunywa ngokuya ngezidingo zesistimu, iyunithi iyi-cubic metres ngehora (m³/h) noma amalitha ngesekhondi (L/s).
• Phakamisa (H): Inqunywa ngokwezidingo zesistimu, iyunithi iyimitha (m).
• Amandla(P): Bala imfuneko yamandla epompo ngokusekelwe kuzinga lokugeleza nekhanda, ngama-kilowatts (kW).

5.2 Khetha uhlobo lwephampu

• Iphampu yokumunca evundlile kabili: Ifanele izikhathi eziningi, kulula ukugcinwa nokulungiswa.
• Iphampu yokumunca kabili eqondile: Ifanele izikhathi ezinendawo elinganiselwe.

5.3 Khetha impahla yephampu

• Impahla yomzimba wepompo: I-Cast iron, insimbi engagqwali, ithusi, njll., ekhethwe ngokuya ngokugqwala kwendawo.
• Impeller impahla: I-Cast iron, insimbi engagqwali, ithusi, njll., ekhethwe ngokuya ngokugqwala kwendawo.

5.4 Khetha uhlobo nemodeli

• Ukukhetha umkhiqizo: Khetha amabhrendi aziwayo ukuze uqinisekise ikhwalithi yomkhiqizo kanye nesevisi yangemuva kokuthengisa.
• Ukukhetha imodeli:Khetha imodeli efanelekile ngokusekelwe kumapharamitha adingekayo kanye nohlobo lwephampu. Bheka kumamanuwali womkhiqizo kanye nolwazi lobuchwepheshe olunikezwa uhlobo.

6.Izikhathi zokufaka izicelo

6.1 Ukuhlinzekwa kwamanzi kumasipala

• sebenzisa: Isetshenziswa kakhulu ezinhlelweni zokuphakelwa kwamanzi emadolobhenifuthayima.
• ukugeleza: Ngokuvamile 500-20000 m³/h.
• Phakamisa: Ngokuvamile amamitha angu-10-150.

6.2 Ukuhlinzekwa kwamanzi ezimbonini

• sebenzisa: Isetshenziswa ezinhlelweni zokujikeleza kwamanzi okupholisa ekukhiqizeni kwezimboni.
• ukugeleza: Ngokuvamile 200-15000 m³/h.
• Phakamisa: Ngokuvamile amamitha angu-10-100.

6.3 Ukuchelela kwezolimo

• sebenzisa: Izinhlelo zokunisela ezindaweni ezinkulu zamapulazi.
• ukugeleza: Ngokuvamile 100-10000 m³/h.
• Phakamisa: Ngokuvamile 10-80 amamitha.

6.4 Ukwakhiwa kwamanzi

• sebenzisa: Isetshenziswa ezinhlelweni zokuhlinzeka ngamanzi ezakhiwo eziphakeme.
• ukugeleza: Ngokuvamile ngu-100-5000 m³/h.
• Phakamisa: Ngokuvamile 10-70 amamitha.

7.Isondlo nokunakekelwa

7.1 Ukuhlolwa okuvamile

• Hlola okuqukethwe: Isimo sokusebenza sephampu, idivayisi yokuvala, amabheringi, amapayipi nokuvala ama-valve, njll.
• Hlola imvamisa: Kunconywa ukwenza ukuhlolwa okuphelele kanye ngenyanga.

7.2 Ukugcinwa njalo

• Gcina okuqukethwe: Hlanza umzimba wepompo kanye ne-impeller, hlola bese ushintsha izimpawu, ama-lubricate bearings, uhlelo lokulawula ukulinganisa, njll.
• Imvamisa yesondlo: Kunconywa ukwenza ukunakekelwa okuphelele njalo ezinyangeni eziyisithupha.

7.3 Ukuxazulula izinkinga

• Amaphutha ajwayelekile: Iphampu ayiqali, ingcindezi enganele, ukugeleza okungazinzile, ukwehluleka kwesistimu yokulawula, njll.
• Isixazululo: Xazulula inkinga ngokuya ngephutha, futhi uxhumane nochwepheshe ukuze ulungiswe uma kunesidingo.

Qinisekisa ukuthi ukhetha okulungile ngale mihlahlandlela yokukhetha enemininingwane龙8头号玩家:Iphampu yokumunca kabili, ngaleyo ndlela ihlangabezane ngempumelelo nezidingo zohlelo futhi iqinisekise ukuthi ingasebenza ngokuzinza nangokuthembekile emisebenzini yansuku zonke.